Advance automated manufacturing relies on sensor equipment to ensure each step of the process is done correctly, reliably, and effectively. For many standard applications, inductive, capacitive, or basic photoelectric sensors can do a fine job of monitoring and maintaining the automated manufacturing process. However, when transparent materials are the target, you need a different type of sensor, and maybe even need to think differently about how you will use it.
What are transparent materials?
When I think of transparent materials, water, glass, plexiglass, polymers, soaps, cooling agents, and packaging all come to mind. Because transparent material absorbs very little of the emitted red LED light, standard photoelectric sensors struggle on this type of application. If light can make its way back to the receiver, how can you tell if the beam was broken or not? By measuring the amount of light returned, instead of just if it is there or not, we can detect a transparent material and learn how transparent it is.
Imagine being able to determine proper mixes or thicknesses of liquid based on a transparency scale associated to a value of returned light. Another application that I believe a transparent material photoelectric senor would be ideal for is the thickness of a clear bottle. Imagine the wall thickness being crucial to the integrity of the bottle. Again, we would measure the amount of light allowed back to the receiver instead of an expensive measurement laser or even worse, a time-draining manual caliper.
Transparent material sensor vs. standard photoelectric sensor
So how does a transparent material sensor differ from a standard photoelectric sensor? Usually, the type of light is key. UV light is absorbed much greater than other wavelengths, like red or blue LEDs you find in standard photoelectric sensors. To add another level, you polarize that UV light to better control the light back into the receiver. Polarized UV light with a polarized reflector is the best combination. This can be done on a large or micro scale based on the sensor head size and build.
Uses for transparent material sensor include packaging trays, level tubes, medical tests, adhesive extrusion, and bottle fill levels, just to name a few. Transparent materials are everywhere, and the technology has matured. Make sure you are looking into specialized sensor technologies and working through best set-up practices to ensure reliable detection of transparent materials.
The post Looking Into & Through Transparent Material With Photoelectric Sensors appeared first on AUTOMATION INSIGHTS.
